EZAD549

Specially formulated for vitrified tiles with good properties in bond strength, slip resistance, open time and flexibility.
For fixing of: Specifically vitrified tiles
To surface: All cement-based surfaces as well as other pre-primed surfaces
Floors: 20kg covers +- 4 square metres
Walls: 20kg covers +- 4 square metres

Code to come

Specially formulated, high sheer strength cement-based tile adhesive. It does not require surface preparation basecoat primer.
For fixing of: Ceramic • Porcelain • Natural stone • Clay tiles • Vitrified tiles
To surface: Powerfloated floors • Screeded floors • Tile-on-tile applications
Walls: 20kg covers ± 4 square meters
Floors: 20kg covers ± 6 square meters

EZAD103

Specially formulated cement-based tile adhesive. Designed to improve workability, bond strength and coverage.
For fixing of: Ceramic • Porcelain • Clay • Cement tiles • Natural stone • Mosaics
To surface: All cement-based surfaces as well as other pre-primed surfaces
Floors: 20kg covers ± 6 square meters
Walls: 20kg covers ± 4 square meters

EZAD104

Specially formulated cement-based tile adhesive. Designed to improve workability, bond strength and coverage.
For fixing of: Ceramic • Porcelain • Clay • Cement tiles • Natural stone • Mosaics
To surface: All cement-based surfaces as well as other pre-primed surfaces
Floors: 20kg covers ± 6 square meters
Walls: 20kg covers ± 4 square meters

EZAD551

Specially formulated, flexible, high-strength, non-staining, white cement-based tile adhesive, designed for fixing light coloured porcelain and marble tiles.
For fixing of: Ceramic • Clay • Porcelain • Marble • Cement tiles • Vitrified tiles • Natural stone
To surface: Cement-based surfaces • Pre-primed surfaces • Permanently wet areas • Underwater conditions
Floors: 20kg covers +- 4 square metres
Walls: 20kg covers +- 6 square metres

EZAD252

Specially formulated, rapid-set, white, cement-based tile adhesive. Non-staining and sets in 6 hours.
For fixing of: Light-coloured porcelain • Marble tiles • Glass mosaics
To surface: All cement-based surfaces as well as other pre-primed surfaces
Floors: 20kg covers +- 4 square metres
Walls: 20kg covers +- 6 square metres

EZAD100

Specially formulated, rapid-set, white, cement-based tile adhesive. Non-staining and sets in 6 hours.
For fixing of: Light-coloured porcelain • Marble tiles • Glass mosaics
To surface: All cement-based surfaces as well as other pre-primed surfaces
Floors: 20kg covers +- 4 square metres
Walls: 20kg covers +- 6 square metres

EZAB548

A white cement-based tile adhesive and grout. For permanently wet conditions, replace water in the mix with PRO GRIP BONDING LIQUID.
For fixing and grouting of: Glass mosaics • Ceramic mosaics • Marble • Cement mosaics • Natural stone
To surface: Cement-based surfaces • Pre-primed surfaces
Floors: 5kg covers +- 1 square metre
Walls: 25kg covers +-1 square metre

EZAD502 - 7.5kg

EZAD503 - 1.5kg

A ready-to-use, highly flexible paste adhesive. DO NOT use if moisture is present.
For fixing of: Ceramic • Porcelain • Cement tiles • Clay mosaics • Natural stone
To surface: Pre-primed wood • Gypsum board • Nutec board • Metal surfaces
Floors: 1kg covers +- 0.5 square metres
Walls: 1kg covers +- 0.6 square metres

EZGR559

Designed to point tile joints up to a width of 8mm on walls and floors. High resistance to shrinkage and completely waterproof.
For grouting of: All types of tiles
To surface: All surfaces. Allow at least 24 hours after tiles are laid before grouting
Floors: 5kg covers +- 11 square metres
Walls: 5kg covers +- 15 square metres
Also available in colours

EZGR540

Specially designed to point tile joints wider than 8mm on floors.
For grouting of: Kilimanjaro tiles
To grout: All joints in excess of 8mm
Floors: 5m2 with 8mm joints
Walls: 5m2 with 8mm joints
Only available in dove grey

(available in 7 colours)

120ml

(available in 7 colours)

EZCH504 - 5 litre bucket

EZCH004 - 1 litre bottle

An acrylic latex cement additive as well as a surface preparation.
For various applications such as tiling onto wooden surfaces, previously painted or gypsum-plastered and bitumen adhesives, etc. Recommended use in bathrooms and kitchens.

EZCH501 - 5 litre bucket

EZCH001 - 1 litre bottle

An acrylic latex cement additive which has been formulated to be used with all the PRO GRIP cement-based products.
It can be used as a primer to rejuvenate friable old plaster prior to tiling, painting or re-plastering. Increases bonding strength.

EZAD108

Specifically formulated as a high-strength, quick-setting, cement-based compound.
For: Levelling imperfect floors
To surface: New and existing concrete floors. New floors must cure for 6 weeks before application
Floors: 20kg covers +- 4 square metres, averaging 2mm thickness