PRO CARE HEAVY DUTY CLEANER is a potent alkaline degreaser which, when correctly diluted, has been formulated to remove grease, oils, and dirt from all types of tiled surfaces. PRO CARE HEAVY DUTY CLEANER may also be used to neutralize surfaces after they have been acid washed with PRO CARE GROUT REMOVER. This product is also suitable for heavy duty cleaning applications e.g., factories, garages, etc.

DILUTION:

High strength: 1 part PRO CARE HEAVY DUTY CLEANER to 5 parts water for heavily soiled surfaces and industrial applications.

Medium strength: 1 part PRO CARE HEAVY DUTY CLEANER to 10 parts water for surfaces soiled with grease and oils.

Low strength: 1 part PRO CARE HEAVY DUTY CLEANER to 20 parts water for general cleaning and neutralizing after acid washing.

PRODUCT APPLICATION:

• Apply PRO CARE HEAVY DUTY CLEANER to a small area first, to ensure the product does not damage the tile.
• Prepare the surface by sweeping, vacuuming, or dusting. Mask off any adjacent surfaces that need to be protected.
• Mix the correct dilution and apply using a mop or watering can and allow the solution to soak for 10 – 15 minutes and begin loosening the residues. Do not allow the solution to dry on surface.
• Scrub difficult to remove areas with a nylon bristled brush or broom taking care not to damage the tiles.
• Rinse the surface well with clean fresh water.
• Inspect the surface after it has dried. Repeat if necessary.

PRECAUTIONS & LIMITATIONS:

a. Ensure that the above instructions are adhered to at all times and do not adulterate the product in any way as this could cause failure.
b. Rubber gloves should be used when applying PRO CARE HEAVY DUTY CLEANER. In the event of contamination, rinse skin under cold water. Consult a doctor if irritation persists.
c. Keep PRO CARE HEAVY DUTY CLEANER away from pets and children.
d. Do not ingest.