PRO CARE GLUE & SEALER REMOVER is a powerful stripper suitable for the removal of tar, glues, and sealers from most types of floors. This product is also suitable for heavy duty cleaning applications (e.g., factories garages etc.) and for spot cleaning of difficult stains.

DILUTION:

Use as supplied.

PRODUCT APPLICATION:

• Apply PRO CARE GLUE & SEALER REMOVER to a small area first, to ensure the product does not damage the surface.
• Prepare the surface by sweeping, vacuuming, or dusting.
• Mask off any adjacent surfaces that need to be protected.
• Do not apply to large areas. Rather partition the area to be cleaned into smaller workable areas.
• Apply liberally to the floor with a paint brush or sheep skin applicator and allow the solution to soak for 5 – 10 minutes to begin loosening the residues. Do not allow the solution to dry on surface.
• Scrub difficult to remove areas with a nylon bristled brush or broom taking care not to damage the tiles.
• Rinse the surface well with clean fresh water.
• Inspect the surface after it has dried. Repeat if necessary.

PRECAUTIONS & LIMITATIONS:

a. Ensure that the above instructions are adhered to at all times and do not adulterate the product in any way as this could cause failure.
b. Rubber gloves should be used when applying PRO CARE GLUE & SEALER REMOVER. In the event of contamination, rinse skin under cold water. Consult a doctor if irritation persists.
c. Keep PRO CARE GLUE & SEALER REMOVER away from pets and children.
d. Do not ingest.